BV206 Bluetooth Module

The BV206 is a PCB carrier for the low cost Bluetooth modules based on the Cambridge Silicon Radio Chip. The module will accept a version on the AT command set and so is relatively easy to use.

The PCB has reset and a program pin that allows the module to be operated as slave or master.

On Line Resources

Features

• Bluetooth Specification v2.0+EDR
• Frequency: 2.4GHz ISM band
• Modulation: GFSK(Gaussian Frequency Shift Keying)
• Transmit power: not more than 4dBm, Class 2
• Sensitivity: not more than -84dBm at 0.1% BER
• Rate: Asynchronous: 2.1Mbps(Max) / 160 kbps
• Synchronous: 1Mbps/1Mbps
• Security features: Authentication and encryption
• Support profiles: Bluetooth serial port (master & slave)
• Power Supply: +3.3VDC 50mA
• Working temperature: –5°C to 45°C
• Max. serial baud rate: 1382400bps, support for hardware flow control transfer
• Dimension: 30mm x 23mm x 2.5 mm

Practically speaking the device is Class 2 which has a range of about 10m and is capable of data rates of 1382400 Baud.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: