Welcome! Log In Create A New Profile


referance voltage for adc

Posted by bazwilson1 
referance voltage for adc
January 01, 2015 12:01PM
on the BV502 can I set an external referace voltage for the ADC or do I have to use the fixed votage, and if so what is that fixed voltage??
Re: referance voltage for adc
January 01, 2015 12:23PM
By default the ADC voltage is fixed at 3.3V. If using rookie then it is simply a case of adc_init(channel) and adc_get(channel) to use.

All the pins are available so it is possible to use a different source, you will need to consult the PIC32MX170 data sheet.
Sorry, only registered users may post in this forum.

Click here to login