Welcome! Log In Create A New Profile

Advanced

BV509/ESP8266

Posted by Tinine 
BV509/ESP8266
April 06, 2016 07:28PM
Just looking to the future; I would like to use an external antenna with this WiFi device. Does a pin-compatible version exist or will I need to look elsewhere?

Also, I understand that this info is available somewhere but what is the maximum baud of each UART on the BV509?

Cheers!

Tinine
Re: BV509/ESP8266
April 07, 2016 05:29AM
yes,
there is a version with a socket for an antenna as in this device (http://www.byvac.com/index.php/BV510)

I think the Baud rate may go up to 2,000,000 but have not checked for a while.
Re: BV509/ESP8266
April 07, 2016 10:53PM
Hi Jim,

I take it that what you mean is the ESP8266 module shown plugged in to the BV510 is pin compatible with the BV509, right?

Where would I find this module?

Cheers,

Tinine
Re: BV509/ESP8266
April 08, 2016 09:09AM
There is a new BV509 not yet released that could use the module. I assume the BV509 (BV508?) that you have uses the PTH type (plug in) which does not have an external antenna.

If you want to use the SMD version of the ESP8266 there is the BV107_b which is a serial to wifi module. This can be supplied with the antenna type but is not advertised. It is the same cost but if an antenna is required then that costs £3.0 extra.

If you have a BV508 or BV509_b (not BV509_d - not available at time of writing) the above module will plug in (but is not plug compatible) as a replacement for the original PTH ESP8266.
Re: BV509/ESP8266
April 08, 2016 09:57AM
Yes, I have the BV509 with the plug-in WiFi module.

Sounds like the BV107-b is the way to go. I'm not particularly fond of piggy-backed boards so this will work for me.
I build industrial control systems and like to have my boards securely fixed.

Many thanks.

Cheers.
Sorry, only registered users may post in this forum.

Click here to login