Hi , I`m using my BV4612 on I2c and reading the doc`s :-
INT, Goes low only when a key is being touched otherwise it is high.
With me INT when a key is touched goes high and stays high , how do I make it low again.
I`ve tried clearing the buffer with command 1 , and reading with command 2 which says the buffers is clear .
I`ve read the doc , but I guess what I`m after may be hiding somewhere .
FOUND IT , read from the buffer , but you can`t just clear it.
Edited 1 time(s). Last edit at 11/04/2015 07:46PM by peter_a.
