After a lot of messing about, got it working using info from this page Had to load each file on it's own, would not load in off card, then strip back to get it running To send "mypage" you create a web page and save to SC card in directory /web you add a function for each new page i.e. (note TEMPFILE$ must be uppercase) function mypage() create_tempFile("/web/mypage.by kev1953 - ByPic
Hi Jim Sorry am updating as I go I have at last looked at the BV508 with ESP8266, it seamed the best use of this is with a SD card fitted. So added the hardware, a BV410-A Pin 1 CS to CS B14 Pin2 MOSI to DI B5 Pin3 Gnd to Gnd Pin 4 3.3v to 3.3v Pin 5 SCK to CLK Pin 7 MISO to DO B5 Is this correct?, on power up the SD LED flashes a number of times, on doing a reset it flashes once bby kev1953 - ByPic
This project will show how to connect a PIC32 board to a Android device using Bluetooth. See PROJECTS pageby kev1953 - ByPic
The problem with any electronic project is how to make a professional looking user interface, you can have switches and a LED display, a LCD 2/4 line text display, even a touch panel with colour screen. All these will work but all have the same problem, how to house them so the end product looks good. I have always been on the lookout for a ready made product that can interface with the electronby kev1953 - Projects
Hi Don't know if you sorted it? The ones used in the BV500 kit for the 7 segment are BS170by kev1953 - ByPic
How do you fill an ARRAY, something like ? dim daysim[13] = (0,31,28,31,30,31,30,31,31,30,31,30,31)by kev1953 - ByPic
OK so no ones done it, here is my code, hope this may help someone? Using PB1 & DS1302 , I/O bits RB6, RB5 & RB14 Load code, run DS1302_init() then DStime() will display Time,Date etc No timings tested, and code may be naff, but it works so better than nothing dim p,v,p1,v1 dim h,m,s,dd,mm,yy,wd dim d$,s$ dim dow$ dow$ = " MonTueWedThuFriSatSun" function Dby kev1953 - ByPic
Hi Has anyone written code to R/W to the DS1302 ?by kev1953 - ByPic
Thanks, but had already tried that, I should have said it's on a BP1 board and list dose not work tried on BP2 board and list works Had a look using peekc, and found that I could maybe decode the BP2, but the flash on the BP1 seems to be stored differently, any pointers pleaseby kev1953 - ByPic
Hi, Is there a way to get a list of the functions stored in flashby kev1953 - ByPic
Many thanks Jimeer, a link to these would be good on the BP2 page Old boards had a PDF file for each board but now it seams you have to try and find the info for each boardby kev1953 - ByPic
Hi can you tell me where I can find info for the protocol for reading and writing to the sd cardby kev1953 - ByPic