Hi Jim I kind of half expected it. The next section, "Part 6 Timers" just returns error codes of 31 and 28 when trying to do enter/download to chip. I'm guessing the rest of the tutorials need updating / modifying as the first example of "Part 7 Interrupts" returns the same error codes. Any workaround until things get updated? Regardsby chipfryer27 - ByPic
Hi Jim I changed the lines on the expanded code that I copied and it now loads. I'll reconnect the display later and play. Thanks for the help. Regardsby chipfryer27 - ByPic
Hi Jim Thanks for your patience. That now gives me back the "rookie installed Version 3" at reboot. Now I'm back to my original problem from the top of the page. When I try and download the last tutorial from Section 5 seven_seg_3.bas (http://byvac.com/mBlib/flb/Tutorial/PIC32MX1_Family/2013/seven_seg_3.bas) it stops at line 68 with: error (27) <tble_get$> error (0by chipfryer27 - ByPic
Hi Jim Thanks for your time. I agree that I am probably downloading rookie 3 as fltell shows about a 20k use of memory. My concern is that unlike a couple of days ago, I no longer get any indication of an installation of rookie upon boot/reboot. Until yesterday I would see after "system cold start" BV500 - rookie installed version 3.0 etc, now after "system cold start&quoby chipfryer27 - ByPic
Jim I seems that I cannot download rookie to the chip anymore. I have tried both the easy and hard ways and despite getting no errors the welcome screen still doesn't report any rookie and tuturials that previously worked when I had v3.0 (yesterday), now don't. I'm now at a loss. Regardsby chipfryer27 - ByPic
Jim After recieving the kit I followed instructions and loaded rookie Version 3.0. When I boot or reboot the "welcome" screen would state "BV500 - rookie installed Version 3.0" etc and I took a screenshot of it. However after I followed your instructions above, the welcome screen now says "ByPic Version 2.3" etc. No mention is made of any rookie. In additionby chipfryer27 - ByPic
Hi Jim Thanks for the help, appreciated I grabbed a screensave before I followed your instructions and it claimed I was using rookie 3.0 however I don't see a way to attach any files to forum messages. Anyway, I did the following: flclear(0) - this brought me back to version 2.3. Pasted your link into PSPad and clicked Open URL in Clip - this downloaded from the website. I then presby chipfryer27 - ByPic
Hi I'm a complete newbie with ByPic and I've just obtained the BV500 Kit, installed rookie v3.0 as per the user guide and I'm working my way through the tutorials. However, having reached the 7-Segment Display examples I'm running into a bit of trouble. When I download the following tutorial in PSPad and "F4" I get an error report informing of errors in Line 68 and Line 86.by chipfryer27 - ByPic