Welcome! Log In Create A New Profile

Advanced

Show all posts by user

This is for serial & I2C devices such as the LCD controllers etc.
Page 1 of 1    Pages: 1
Results 1 - 6 of 6

Re: BV4115 bug??? - 8 years ago

Thank's. Router is about 1m away from module. I'll try everything and notice you about my progress. If everything will be fine (stress test 24/7), I'll write you for next step of our cooperation. Best regards Urko
by urko - Serial & I2C Devices

Re: BV4115 bug??? - 8 years ago

After hard reset and setting BV4115. I leave "Ap setup" fields cleared to null. Now i communicate with module from telnet. I will testing how long could be connected, without resetting modul. Thank u, Urko
by urko - Serial & I2C Devices

Re: BV4115 bug??? - 8 years ago

Hi, After telnet +++rr, situation is worse :) Now when I connect with telnet, everything is black ***info -> nothing happend or black screen, After quick button reset, same situation. Test from application wfrelay, sometimes work, sometimes not. (same from the beginning) I need to wait for an hours to establish connection. I can use this modul just for occasionally test :)
by urko - Serial & I2C Devices

Re: BV4115 bug??? - 8 years ago

Thank you for fast replay, very kind of you. If just open cmd and write down telnet 192.168.4.1 80, nothing happend (black screen after few second return to cmd) After button restart on BV4115, and repeat telnet command i get: Firmware version VF1_1.9.0 Chip ID: da8109 Flash ID: 1640e0 sys Flag: f0 Current Device Sockets: remote port 51697 local port 80 local IP 0.0.0.0 remote IP 192
by urko - Serial & I2C Devices

Re: BV4115 bug??? - 8 years ago

Hi, WIFI router is:192.168.4.10 BV4115 is on 192.168.4.1 PC is on 192.168.4.210 ping 192.168.4.1 is 160-205ms Maybe help this Error in app "wfrelay": Connnecting to 192.168.4.1 Port 80 Traceback (most recent call last): File "<string>", line 39, in btnConnect File "D:\C\Python\PyInstaller-2.1\wfrelay\build\wfrelay\out00-PYZ.pyz\BV4115W" ,
by urko - Serial & I2C Devices

Re: BV4115 bug??? - 8 years ago

HI guys, I have one problem with BV4115. When set module as station and connected to network, from "[192.168.4.1]; Mode to set [1] (1 is station 2, is Access Point), set in Satiation Setup Baud Rate [115200] Station Setup (ssid,pass,ip,gateay) AP Setup [, , 0, 1] (ssid,pass,security,channel) Sender setup After pressing button "save changes"
by urko - Serial & I2C Devices
Page 1 of 1    Pages: 1