Welcome to the shop, if you are interested in reading about the products see the datasheets for each item or check the links in the right hand side menu.
| NEW Zero Keypad  This
is an RC-5 (Phillips) IR remote decoder that can be used with a PC,
Microcontroller or stand alone£9.98 |
 Serial AND I2CThis is a 4 digit LED, 7Segment numeric display that has BOTH I2C AND a Serial interface so the user can choose which one to use. £9.95 |
Now Available BV513-Mini  This
is a cut down version of the BV513 PIC32-Basic Microcontroller. It has
the same processor and PIC32-Basic as the BV513 but has no USB or
mounted SD Card holder. £16.52 |
 Large very clear LCD graphics display uses a serial interface with
VT100 commands. Very easy to use, has two
fonts (normal and bold) and can draw boxes, lines and circles. . Also
available with an
i2c interface.£29.95 |
 Colour
Serial Display based on the Nokia 6610. Very easy to use accepts serial
input and VT100 commands to clear the display draw pictures and
graphics.£36.25 |
 USB to I2C converter and analyser. This very popular low cost device
will install as a COM port on the PC and text commands sent will be
converted to I2C£17.98 |
New DUAL voltage USB to serial converter has TWO on board regulators, 3.3V and 5V £17.98 |
|
Latest PIC32 design with micro SD Card utilises PIC32-Basic for ease of programming. Programs can be saved to RAM, Flash or the SD Card. Three types to choose form starting at £33.00. Operating system allows long file names and subdirectories. All programming is carried out via the USB which is installed as a COM Port and operates up to 2,000,000 Baud. |
|
